Created with Sketch. Created with Sketch.
Toggle menu
Have a question? Live support call 888-279-6661
Lightweight Bolt Carrier Groups and Coatings: A Short Guide

Lightweight Bolt Carrier Groups and Coatings: A Short Guide

Posted by MCS GEAR UP on Nov 18th 2026

Whether you stick with a standard like 5.56 or are in the market for a .300 Blackout BCG that confers the hard-hitting, short barrel performance of that cartridge, there are ways you can improve your AR15 bolt carrier group’s performance.

Two of the best of them are to install a lightweight bolt carrier group and or to upgrade to one that has an advanced coating, some of which will be covered here. Here’s what you should know. 

Lightweight Bolt Carrier Groups

A lightweight AR15 bolt carrier group is one that has had mass removed from it strategically, so as to lighten it. Since the bolt carrier group is, along with the barrel, one of the heaviest AR15 parts, and a contributor to reciprocating mass, this is no small consideration. 

There are numerous reasons to upgrade to a lightweight bolt carrier group, which will be covered here. 

Why Upgrade to a Lightweight BCG

If you’re considering upgrading to a lightweight bolt carrier group, here are some good reasons to do so: 

  • Reduced recoil. The bolt carrier group is probably the single biggest contributor to reciprocating mass, so lightening it is one of the best ways to lower recoil through the BCG. This can have a significant impact with cartridges that produce slightly more recoil. For instance, a lightweight .300 Blackout BCG can help offset the recoil produced by that cartridge.
  • Faster, more fluid cycling. Lightening the bolt carrier group will potentially offer the added benefit of boosting cycling speed, resulting in a snappier, more responsive rifle.
  • An overall lighter rifle. The bolt carrier group is one of the heaviest AR15 parts, along with the barrel and handguard. Reducing weight in the BCG can significantly improve the handling of the rifle. 

Types of AR15 Bolt Carrier Group Coatings 

Installing a lightweight AR15 bolt carrier group is not the only way to improve cycling. There are many advanced coatings used to treat AR15 bolt carrier groups, too. Some of these are: 

  • Black nitride: Black nitride is applied to bolt carrier groups using a case hardening process. It converts the surface of the steel on the bolt carrier group to nitride, a hard, moisture and corrosion-resistant compound that also has a very high permanent dry lubricity. It also leaves an attractive, sleek black finish.
  • Titanium nitride: Titanium nitride is an attractive gold finish that, like black nitride, is very hard, very corrosion-resistant and very moisture resistant. Titanium nitride, also referred to as gold nitride, also leaves a finish that has a very high degree of permanent dry lubricity. 
  • Diamond-like carbon (DLC): Diamond-like carbon uses processes known as chemical vapor deposition (CVD) or physical vapor deposition (PVD) to create a thin layer of very hard diamond-like carbon (hence the name) on the surface of the bolt carrier group. Like black nitride, it leaves an attractive, sleek black finish, and it is also very hard, very wear resistant and very corrosion resistant. 
  • Nickel boron: Nickel boron is another very hard bolt carrier group coating that protects the BCG against moisture, chemicals and wear. It also has a high degree of permanent dry lubricity. Nickel boron offers different aesthetics from the other bolt carrier group coatings mentioned here, with a bright, shiny silver finish. 

Why Upgrade to a BCG with a Coating?

There are numerous reasons to upgrade to a bolt carrier group with an advanced coating. Here are some of the best of them:

  • High surface hardness. The bolt carrier group coatings mentioned in this article improve the surface hardness of the BCG, improving their resistance to wear and abrasion. 
  • Insulation against moisture and corrosive influences. Nitrided finishes, DLC, and the other bolt carrier group coatings mentioned here typically alter the surface chemistry of the BCG itself, rather than just serving as a finish that can wear away. As a result, they afford a superior level of protection against moisture and corrosive influences. 
  • High permanent dry lubricity. The high permanent dry lubricity of the coatings mentioned in this article means that you will be less reliant on liquid lubrication, which is a bonus because oil and grease attract dust, dirt and fouling. An added effect is that the BCG may potentially cycle more quickly as well. 
  • Potentially easier maintenance. These finishes resist fouling adhesion, and since they are less reliant on liquid lubrication, they are relatively easier to keep clean as well. 

We’ve covered this topic in detail before. For more information, see our previous post, AR-15 Assembled Uppers, A Quick Guide to Bolt Carrier Group Coatings. 

Here for a .300 Blackout BCG

If you’re in the market for a .300 Blackout BCG, you’re in the right place. Check out our collection of AR15 parts and if you have any questions, get in touch with us.